This is a brand new replacement radiator and meets or exceeds OEM specs
Core Dimensions: 28-7/16 x 30-1/16 x 1-7/16
Inlet Diameter: 1-3/4
Outlet Diameter: 1-9/16
Shipping to continental US addresses is $25.00 Please call for rates to AK, HI, PR and other destinations.
This radiator includes a second set of transmission oil cooler (TOC) fittings that, if necessary, will replace the fittings currently installed. Please see the applications below that indicate which set of fittings your application requires:
NOTE: The TOC fittings are described by indicating the diameter of the line and the type of the fitting. Therefore based on your application, this radiator uses a 1/2" line with an inverted flare (1/2" INF) or the 1/2" quick connect line (1/2" QC). Fitting descriptions should not be confused with the thread specifications for the fitting.
If your application requires that you need to replace the TOC fittings, follow the steps below. This process is most easily completed with the radiator outside of the vehicle.
Only replace one fitting at a time. Otherwise the cooler will fall into the tank, possibly causing damage to cooler and the O-ring seal between the cooler and the tank.
1.) Remove one of the 1/2" INF fittings using an appropriate wrench. Take care to not unnecessarily disturb the cooler.
2.) Thread the 1/2" QC fitting into the cooler by hand until tight.
3.) Using a torque wrench or similar, tighten the fitting to 15lb-ft.
4.) Repeat steps 1-3 for the other fitting.
5.) Install the radiator into the vehicle. Flush and refill the cooling system using new coolant and distilled water and check for leaks.